2025-04
-19
The machine tool cannot return to zero
The contact of the origin switch may be stuck and unable to move, and it is necessary to check and repair the problem of the contact being stuck.
The origin block may not be able to press the origin switch to the action position, and the position of the block needs to be adjusted to ensure that the switch can be pressed.
More>
2025-04
-19
Malfunction of guide rail oil pump and cutting oil pump
The oil level of the guide rail oil pump is insufficient.
The oil pressure valve of the guide rail oil pump is damaged.
The oil circuit of the machine tool is damaged.
The filter screen of the guide rail oil pump core is blocked.
Use guide rail oil with excessive quality.
The oil injection time of the guide rail oil pump is set incorrectly.
More>
2025-04
-19
Handwheel malfunction
Handwheel malfunction may be caused by the following reasons:
Poor contact of the handwheel shaft selection switch or handwheel magnification selection switch.
Hand wheel pulse causes damage to the disc.
The breakage of the handwheel connecting wire.
More>
No. 20-6, Zone P5, Quanshui Auchan Plaza, Ganjingzi District, Dalian City, Liaoning Province，China
©Copyright 2025 Dalian Winway CNC Machine Tool Co.,Ltd,
辽ICP备2025050747号